Audi A3 build

I bought this A3 2.0T 6MT Brilliant Red with OpenSkye, cold-weather, black pleather, etc.



Plus two 480Cs



Plus four 18x8.5 BBS LMs



Plus a Votex kit



Plus E-level



Plus Bagyard Bombers



Plus Eurojet downpipe

I cut this tank off a contractor air compressor and welded on a couple fittings



I rolled some stainless straps and attached latches and hinges



I don't have the optional 6-CD changer, so I was able to utilize this space





And you can't really see it here, but the E-level ecu is in the "cage"



I located the controller in the arm rest



Install a nutsert



And install a bag



Connect the bottom end



Connect the airline



And you're done

Here's a decent pic of the front bags installed, along with new rotors and pads and painted calipers and stainless lines



I installed the front E-level sensors like so



And for the rears, install more nutserts



Install the sensor



Plug it in and you're done



Here you can see how I mounted the tank with the straps I mentioned earlier



And the compressors were also mounted with nutserts.

I painted the tank



It looks like the pads got sprayed too, but it's grease.

I polished the wheels



Made some hard lines



Put the lip kit on

Anyways, here's the result

Looks killer!

Cool wagon. How high up can you raise it for bad roads?

Ay Shaun I think it goes higher than stock. Unfortunately, I didn't measure stock. But just eyeballing it, it's pretty close to stock at least, but my highly calibrated vision says higher than stock.

These two photos demonstrate the difference between all-the-way-up and all-the-way-down:

That pic is simply amazing.

rob cote wrote:

I think you just broke the internet with awesome.

Were you at UNH last weekend by any chance?